Work TimeSun - Thu : 9:00 - 17:00
Closed on Weekends
Call Center24/7 Support
+ (966) 500-227-220
LocationJeddah
Saudi Arabia
GET A QUOTE
Work TimeSun - Thu : 9:00 - 17:00
Closed on Weekends
Call Center24/7 Support
+ (966) 500-227-220
LocationJeddah
Saudi Arabia
Work TimeSun - Thu : 9:00 - 17:00
Closed on Weekends
Call Center24/7 Support
+ (966) 500-227-220
LocationJeddah
Saudi Arabia
GET A QUOTE

Our team

Dr. Mohamed Helmy Abdel-Aziz

PolymersProfessorWater
Experience:

10 years

Postdoctoral Fellowship – Lakehead University, Canada

Ph.D. (Chemical Engineering) – Alexandria University, Egypt

M.Sc. (Chemical Engineering) – Alexandria University, Egypt

B.Sc. (Chemical Engineering) – Alexandria University, Egypt

Area of expertise: Process intensification (PI), Fabrication of new materials and composites for various applications such as solar cells, nanotechnology, photovoltaic, water treatment and desalination.

 

Research Interests:

My research interest focuses on the development of highly efficient and cost effective techniques for various applications in chemical engineering by adopting a process intensification (PI) approach through the use of techniques such as oscillatory motion, gas sparging, and turbulence promoters (active and inert), and recently ultrasonic vibration, CFD in chemical engineering, and materials engineering are in research. In particular, I am interested in applying different PI approaches in the following areas:

  • Heat and mass transfer in single and two phase flow systems
  • Wastewater treatment and removal of heavy metals by different techniques

  • Electrometallurgical processes (Electrorefining, Electrodeposition, Electrochemical machining etc.)

SEM images of Ni(II)–Cr(III) LDH, Ni(II)–Cr(III)/a LDH, Ni(II)–Cr(III)/g LDH, and Ni(II)–Cr(III)/u LDH at two different magnifications: a before and b after calcination

Principal Publications

Journals:

  1. M. H. Abdel-Aziz, I. A. S. Mansour, G. H. Sedahmed, Study of the rate of liquid-solid mass transfer controlled processes in helical  tubes under turbulent flow conditions, Chemical Engineering and Processing,  49 (2010) 643 – 648.
  2. M.H. Abdel-Aziz, Mass transfer behavior at horizontal cylinder under different flow conditions. International Communications in Heat and Mass Transfer, 38 (2011) 493 – 498.
  3. M.H. Abdel-Aziz, Production of copper powder from wastewater containing CuSO4 and alcoholic additives in a modified stirred tank reactor by cementation, Hydrometallurgy, 109 (2011) 161 – 167.
  4. G. H. Sedahmed, Y. A. El-Taweel, A.H. Konsowa, M. H. Abdel-Aziz, Mass transfer intensification in an annular electrochemical reactor by an inert fixed bed under various hydrodynamic conditions, Chemical Engineering and  Processing, 50 (2011) 1122 – 1127
  5. M. H. Abdel-Aziz, I. Nirdosh, G. H. Sedahmed, Mass transfer at a vertical oscillating screen stack in relation to catalytic and electrochemical reactor design, Industrial and Engineering Chemistry Research 51 (2012) 11636 – 11642.
  6. E-S. Z. El-Ashtoukhy, N. K. Amin, M. H. Abdel-Aziz, Decolorization of acid brown and reactive blue dyes by anodic oxidation in a batch recycle electrochemical reactor, International Journal of Electrochemical Science 7 (2012) 11137 – 11148.
  7. M. H. Abdel-Aziz, Solid-liquid mass transfer in relation to diffusion controlled corrosion at the outer surface of helical coils immersed in agitated vessels, Chemical Engineering Research and Design 91 (2013) 43 – 50.
  8. M. H. Abdel-Aziz, I. Nirdosh, G. H. Sedahmed, Liquid- solid mass and heat transfer behavior of a concentric tube airlift reactor, International Journal of Heat and Mass Transfer 58 (2013) 735 – 739.
  9. E-S. Z. El-Ashtoukhy, M. H. Abdel-Aziz, Removal of copper from aqueous solutions by cementation in a bubble column reactor fitted with horizontal screens, International Journal of Mineral Processing 121 (2013) 65 – 69.
  10. M. H. Abdel-Aziz, I. Hassan, I. Nirdosh, G. H. Sedahmed, Liquid – solid mass transfer behavior of V corrugated surfaces under two phase flow, Chemical Engineering and Processing 70 (2013) 9 – 16.
  11. M. H. Abdel-Aziz, N. K. Amin, E-S. Z. El-Ashtoukhy, Removal of heavy metals from aqueous solutions by liquid cation exchanger in a jet loop contactor, Hydrometallurgy 137 (2013) 126 – 132.
  12. M. H. Abdel-Aziz, I. Nirdosh, G. H. Sedahmed, Ion exchange-assisted electrochemical removal of heavy metals from dilute solutions in a stirred tank electrochemical reactor: A mass transfer study, Industrial and Engineering Chemistry Research 52 (2013) 11655 – 11662.
  13. G. H. Sedahmed, Y. A. El-Taweel, A.H. Konsowa, M. H. Abdel-Aziz, Effect of packing geometry on the rate of mass and heat transfer at a vertical tube imbedded in fixed bed under single and two phase flow, International Communications in Heat and Mass Transfer 48 (2013) 149 – 154.
  14. M. H. Abdel-Aziz, I. Nirdosh, G. H. Sedahmed, Mass and heat transfer behavior of a rough vertical vibrating cylinder in relation to annular electrochemical and catalytic reactor design, International Journal of Heat and Mass Transfer 72 (2014) 595 – 601.
  15. M. H. Abdel-Aziz, I. Nirdosh, G. H. Sedahmed, Intensification of the rate of electropolishing and diffusion controlled electrochemical machining by workpiece oscillation, Journal of the Taiwan Institute of Chemical Engineers 45 (2014) 840 – 845.
  16. G. H. Sedahmed, Y. A. El-Taweel, M. H. Abdel-Aziz, H. M. El-Naqeara, Mass and heat transfer enhancement at the wall of cylindrical agitated vessel by active turbulence promoters, Chemical Engineering and Processing, 80 (2014) 43 – 50.
  17. M.H.Abdel-Aziz, Mass and heat transfer in a batch bubble column operating with and without packing, Industrial and Engineering Chemistry Research, 53 (2014) 9925 − 9931
  18. M. H. Abdel-Aziz, M. Bassyouni, I. A. S. Mansour, A. Nagi, Wall to liquid mass transport and diffusion controlled corrosion in fixed bed reactors, Journal of Industrial and Engineering Chemistry 20 (2014) 2650 – 2656.
  19. M. A. El-Naggar, M. H. Abdel-Aziz, A. A. Zatout, G. H. Sedahmed, Liquid-solid mass transfer behavior of a stirred tank reactor with a fixed bed at its bottom, Chemical Engineering and Technology 37 (2014) 1525 – 1531.
  20. M. Bassyouni, S. W. ul Hasan, M. H. Abdel-Aziz, S. M. S. Abdel-Hamid, S. Naveed, A. Hussain, F.  N. Ani, Date Palm Waste Gasification in Downdraft Gasifier and Simulation using ASPEN HYSYS, Energy Conversion and Management 88 (2014) 693 – 699.
  21. M. Bassyouni,I. Nadeem, S. S.  Iqbal, S. M. S. Abdel-Hamid, M. H. Abdel-Aziz, U. Javid, M. B.  Khan, Ablation and Thermo-mechanical Investigation of short carbon fiber Impregnated Elastomeric Ablatives for Ultrahigh Temperature Applications, Polymer Degradation and Stability 110 (2014) 195 – 202.
  22. N. K. Amin, M. H. Abdel-Aziz, E-S. Z. El-Ashtoukhy, Effect of pulp fiber suspensions on the rate of mass transfer controlled corrosion in pipelines under turbulent flow conditions, Chemical Engineering Research and Design 92 (2014) 2333 – 2338.
  23. N. M. Atef, M. H. Abdel-Aziz, Y. O. Fouad, H. A. Farag, G. H. Sedahmed, Mass and heat transfer at an array of horizontal cylinders placed at the bottom of a square agitated vessel, Chemical Engineering Research and Design 94 (2015) 449 – 455.
  24. M. Bassyouni, S. A. Gutub, U. Javid, M. Awais, S. Rehman, S. M.-S. Abdel-Hamid, M. H. Abdel-Aziz, A. Abouel-Kasem, H. Shafeek, Assessment and analysis of wind power resources using Weibull parameters, Energy Exploration and Exploitation, 33 (2015) 105 – 122.
  25. A. A. Harraz, I. A. El-Gheriany, M. H. Abdel-Aziz, T. M. Zewail, A. H. Konsowa, G. H. Sedahmed, Liquid-solid mass transfer behaviour of a fixed bed airlift reactor, Biochemical Engineering Journal 103 (2015) 1 – 11.
  26. M. H. Abdel-Aziz, I. Nirdosh, G. H. Sedahmed, Mass transfer at a rotating tubular packed bed of woven screens in relation to electrochemical and catalytic reactor design, International Journal of Heat and Mass Transfer 90 (2015) 427 – 438.
  27. M. H. Abdel-Aziz, M. Z. El-Abd, M. Bassyouni, Heat and mass transfer in three phase fluidized bed containing high density particles at high gas velocities, International Journal of Thermal Sciences 102 (2016) 145 – 153.
  28. A. Al-Shehri, S. A. Gutub, M. A-B Ebrahim, H. Shafeek, M. F. Soliman, M. H. Abdel-Aziz, Integration between Industry and University: Case Study-Faculty of Engineering at Rabigh – Saudi Arabia, Education for Chemical Engineers 14 (2016) 24 – 34.
  29. M. H. Abdel-Aziz, E-S. Z. El-Ashtoukhy, M. Bassyouni, Recovery of copper from effluents by cementation in a multirotating cylinder – agitated vessel, Metallurgical and Materials Transactions B, 47 (2016) 657 – 665.
  30. Umair Javaid, Zaffar M. Khan, M. B. Khan, M. Bassyouni, S. M. Abdel-Hameed, M. H. Abdel-Aziz, Syed W. ul Hasan, Fabrication and thermo-mechanical characterization of glass fiber/vinyl ester wind turbine rotor blade, Composites Part B: Engineering 91 (2016) 257 – 266.
  31. M. H. Abdel-Aziz, M. Bassyouni, S. A. Gutub, E-S. Z. El-Ashtoukhy, S. M.-S. Abdel-Hamid, G. H. Sedahmed, Removal of cyanide from liquid waste by electrochemical oxidation in a new cell design employing graphite anode, Chemical Engineering Communications 203 (2016) 1045 – 1052.
  32. M. H. Abdel-Aziz, I. Nirdosh, G. H. Sedahmed, Mass and heat transfer at the outer surface of helical coils under single and two phase flow, Applied Thermal Engineering 103 (2016) 713 – 719.
  33. I. A. Said, M. H. Abdel-Aziz, Y. A. El-Taweel, G. H. Sedahmed, Mass and heat transfer behavior of a rotating disc with parallel rectangular grooves, International, Chemical Engineering and Processing  105 (2016) 110 – 116.
  34. M. M. Taha, Y. O. Fouad, M. H. Abdel-Aziz, A. H. Konsowa, G. H. Sedahmed, Mass and heat transfer behaviour of catalytic and electrochemical stirred tank reactors employing metallic screens lining as catalyst support and electrode, The Canadian Journal of Chemical Engineering 94 (2016) 1539 – 1547.
  35. M. H. Abdel-Aziz, S. Gutub, M. F. Soliman, M. Bassyouni, S. F. Magram, Removal of heavy metals from wastewater using sludge – polymer hybrid adsorbents, Annual Set The Environment Protection 18 (2016) 28 – 45
  36. M. H. Abdel-Aziz, E- S. Z. El-Ashtoukhy, M. Sh. Zoromba, M. Bassyouni, Oil-in-water emulsion breaking by electrocoagulation in a modified electrochemical cell, International Journal of Electrochemical Sciences 11 (2016) 9634 – 9643.
  37. A. H. Konsowa, M. H. Abdel-Aziz, M. S. E. Abdo, M. S. Hassan, G. H. Sedahmed, Effect of free swirl flow on the rate of mass and heat transfer at the bottom of a vertical cylindrical container and possible applications, Applied Thermal Engineering  111 (2017) 68 – 76.
  38. B. A. Amer, M. H. Abdel-Aziz, E.-S.Z. El-Ashtoukhy, N. K. Amin, Extraction of heavy metals from aqueous solutions in a modified rotating disc extractor, Journal of Water Reuse and Desalination (2016) DOI: 10.2166/wrd.2016.178
  39.  M.  F.  Soliman, M.  H.  Abdel-Aziz, O. A.  Bamaga, L. Gzara, S. F.  Al-Sharif, M.  Bassyouni, I. Ahmed, R. Z. Ahmad, E. Drioli, M. Albeirutty, I. Ali, H. Bake, Performance evaluation of blended PVDF membranes for desalination of seawater RO brine using direct contact membrane distillation, Desalination and Water Treatment (2016) In press
  40. M. Sh. Zoromba, S. Alghool, S.M.S. Abdel-Hamid, M. Bassyouni, M. H. Abdel-Aziz, Polymerization of Aniline Derivatives by K2Cr2O7 and Production of Cr2O3 Nanoparticles, Polymers for Advanced Technologies (2017) DOI: 10.1002/pat.3987

Conferences:

  1. The 2013 International Conference on Advanced ICT (Information and Communication Technology) for Education (ICAICTE 2013) September 20 – 22, 2013, Sanya, Hainan, China
  2. International Conference on Advances in Mechanical and Automation Engineering- MAE    2014, Rome, Italy on 07- 08  June, 2014.
  3. The Twenty-Second Annual International Conference on Composites /Nano Engineering (ICCE-22) Malta, July 13-19, 2014
  4. 9th International Technology, Education and Development Conference, Madrid, 2nd – 4th of March, 2015
  5. International Conference on Chemical, Environmental and Biological Sciences (CEBS-2015) March 18-19, 2015 Dubai (UAE)
  6. The 2015 TechConnect World Innovation Conference and Expo, to be held June 14-17, 2015, at the Gaylord National Resort and Convention Center, National Harbor, Maryland, just outside of Washington, D.C., U.S.A.
  7. KAUST Research Conference: Recent trends in predicating and monitoring the integrity of composites (COMINT) June 1 – 2, 2015, Saudi Arabia.
  8. International Conference on Industrial Chemistry June 27-28, 2016 New Orleans, Louisiana, USA

Conferences publications

  1. A. Al-Shehri, M. A-b Ebrahim, H. Shafeek, M. F. Soliman, M. H. Abdel-Aziz, Bridging the Gap between University and Industry: Efforts Made at Faculty of Engineering – Rabigh – Saudi Arabia, Proceedings of The 2013 International Conference on Advanced ICT and Education, Book Series: Advances in Intelligent Systems Research, Volume: 33 (2013) Pages: 448-456 (doi.org/10.2991/icaicte.2013.90) ATLANTIS PRESS, 29 AVENUE LAVMIERE, PARIS, 75019, FRANCE
  2. M. Bassyouni, M.H. Abdel-Aziz, S.M.S. Abdel-Hamid, Characterization of Multiwall Carbon Nanotubes- Jute Fiber Hybrid Reinforced Vinylester Composites Using Vacuum Resin Infusion Process, The Twenty-Second Annual International Conference on Composites /Nano Engineering (ICCE-22) Malta, July 13-19, 2014
  3. H. Shafeek, M. H. Abdel-Aziz, A. Alshehri, S. A. Guttb, M. Bassyouni, Requirements for Continuous Improvement of the Quality of Engineering Education, Proceedings of the 9th International Technology, Education and Development Conference, Madrid, 2nd – 4th of March, (2015) Pages: 3134-3134, ISBN: 978-84-606-5763-7, ISSN: 2340-1079
  4. M. Bassyouni, M.H. Abdel-Aziz, S. Gutub, M. F. Soliman, S. M.-S. Abdel-Hamid, Removal of pollutants from freshwater using foam biocomposites in a fixed bed packed column: Adsorption and kinetic study, International Conference on Chemical, Environmental and Biological Sciences (CEBS-2015) March 18-19, 2015 Dubai (UAE)
  5. M. Bassyouni, Saud A. Gutub, S.M.-S. Abdel-Hamid, M.H. Abdel-Aziz, Umair Javaid, M. Sh. Zoromba, Synthesis and characterization of Multiwalled – Carbon Nanotubes / Kevlar Fiber Hybrid Reinforced Epoxy Composites, The 2015 TechConnect World Innovation Conference and Expo, Washington, D.C., U.S.A. (Poster presentation)
  6. M. M. Taha, M. H. Abdel-Aziz, Y. O. Fouad, A. H. Konsowa, G. H. Sedahmed Study of the performance characteristics of a stirred tank reactor suitable for diffusion controlled liquid-solid catalytic reactions, Education Division 2015 – Core Programming Area at the 2015 AIChE Annual Meeting
  7. M. Bassyouni, S. M.-S. Abdel-Hamid, M. H. Abdel-Aziz, U. Javaid, S. ulHasan, M. Sh. Zoromba, Failure analysis of fiber reinforced plastics light pole, International Conference on Industrial Chemistry June 27-28, 2016 New Orleans, Louisiana, USA, http://dx.doi.org/10.4172/2469-9764.C1.002
  8. M. H. Abdel-Aziz, M. Sh. Zoromba, M. Bassyouni, Novel and facile eco-friendly method of synthesis poly (o-aminophenol) homopolymer and (o-aminophenol)-m- phenylenediamine copolymer based on mechano-chemical solid state polymerization, International Conference on Industrial Chemistry June 27-28, 2016 New Orleans, Louisiana, USA, http://dx.doi.org/10.4172/2469-9764.C1.002

Recent Professional Development Activities (Workshops, Training, etc.)

  1. Dynamic mechanical analysis training (Faculty of Engineering, King Abdulaziz University, Saudi Arabia)
  2. Membrane contactors, reactors and integrated membrane systems (Center of Excellence in Desalination Technology, King Abdulaziz University, Jeddah, Saudi Arabia) Presented by Prof. Enrico Drioli (January 2014)
  3. Quality standard and accreditation (Teaching and Learning Development Center, King Abdulaziz University, Jeddah, Saudi Arabia)
  4. Course design and evaluation according to academic accreditation (Teaching and Learning Development Center, King Abdulaziz University, Jeddah, Saudi Arabia)
  5. Avoiding plagiarism in scientific research (Deanship of Scientific Research, King Abdulaziz University, Jeddah, Saudi Arabia)
  6. Driving AFM Performance Forward- New benchmarks in speed, property mapping, and ease of use (ECE seminar Hall, King Abdulaziz University in collaboration with Electrical and Computer Engineering Department, Jeddah, Saudi Arabia)
  7. The six effective steps for students assessment (Teaching and Learning Development Center, King Abdulaziz University, Jeddah, Saudi Arabia)
  8. New membrane operations and membrane preparation (Center of Excellence in Desalination Technology, King Abdulaziz University, Jeddah, Saudi Arabia) Presented by Prof. Enrico Drioli (8/5/2014)
  9. Recent developments in membrane engineering (Center of Excellence in Desalination Technology, King Abdulaziz University, Jeddah, Saudi Arabia) Presented by Prof. Enrico Drioli (25/2/2015)
  10. Preparation for academic accreditation (Teaching and Learning Development Center, King Abdulaziz University, Jeddah, Saudi Arabia) (12 – 13 /4/2015)
  11. The third technical meeting at center of nanotechnology 2015, KAU, 5th November 2015.
  12. KAUST work shop “The Measurement of Nano Structure Material Confocal Technology” on 24th Feb, 2016

Courses:
ChE 331 : Momentum Transfer
ChE 331 : Corrosion engineering
CHEN 331 : Mass Transfer
CHEN 341 : Process Dynamic and Control 1
CHEN 441 : Process Dynamic and Control II
CHEN 451 : Plant Design
CHEN 342 : Numerical Methods in Chem. Eng.
Copyright © Integrated Engineering Technologies 2021 — All rights reserved. بيت خبرة مرخص بجامعة الملك عبدالعزيز (جدة، المملكة العربية السعودية)
Jeddah, Saudi Arabia